Accell MPC-68K Series 用户手册
-14-
MPC Peripherals ~ Common for MPC-68K and MPC-816 ~
Cable DOS/V 98
[Characteristics]
This is a cable of our company brand to connect MPC and a personal computer. Although the
basic cable is for DOS/V, because a 25-pin conversion connector is included, it can also be used
for PC98.
This is a cable of our company brand to connect MPC and a personal computer. Although the
basic cable is for DOS/V, because a 25-pin conversion connector is included, it can also be used
for PC98.
FTM
(FTM98 / FTMDOSV / FTMWIN)
[Characteristics]
MPC terminal software “FTMW32”, 816/68K command references, Communication program development support tools, etc.
are included.
MPC terminal software “FTMW32”, 816/68K command references, Communication program development support tools, etc.
are included.
[Construction]
Setup Disk (3.5” 1.44 MB format).
* Other than these, there are FTM versions for NEC98DOS, DOS/V, and English Windows. Please refer to our Business or
Technical Department.
IOD-024
I/O Relay Box
[Characteristics]
Because the I/O connector of MPC is compact and has high density, wiring work in a large-scale system is troublesome,
and because there is no display of the I/O, debugging is laborsome. IOD-024 connects to the I/O connector of MPC via
a flat cable, and branches it point by point to a relay connector. Also, because each point is equipped with an LED,
wiring debugging and system maintenance become easy. Also, interfacing a sensor containing a two-line amplifier can
be done easily.
(With a case PCML-95W02)
Because the I/O connector of MPC is compact and has high density, wiring work in a large-scale system is troublesome,
and because there is no display of the I/O, debugging is laborsome. IOD-024 connects to the I/O connector of MPC via
a flat cable, and branches it point by point to a relay connector. Also, because each point is equipped with an LED,
wiring debugging and system maintenance become easy. Also, interfacing a sensor containing a two-line amplifier can
be done easily.
(With a case PCML-95W02)
[Specification]
Input: 26-pin/50-pin flat cable.
Output: Molex 5557-04R + 5556TL
[Compatible parts] Please purchase upon necessity.
Pressure-attaching tool (57027-5000 (Molex))
Pressure-attaching tool (57027-5000 (Molex))
Extracting tool (57031-6000 (Molex))
Contacts (5556TL (Molex))
Housing (5557-04R (Molex))
Housing (5557-02R (Molex))
PIF-422
Pulse-Signal Conversion Interface
(Conversion into RS-422 or TTL)
PIF-400
Pulse-Signal Conversion Interface
(DC 24V Open Collector)
[Characteristics]
In MIF-816 and MPC-68K, the pulse-signal output is not isolated. Therefore, if a driver is directly connected, noise may
cause the controller to stall. When a high-noise driver such as an AC servo is connected, please use one of the above
conversion interfaces depending on the kind of interface. Although PIF-422 is an RS-422 output, if an SG terminal is
connected together, it can deal with 5V TTL-level signals.
(A case sold separately: PCML-60S02)
In MIF-816 and MPC-68K, the pulse-signal output is not isolated. Therefore, if a driver is directly connected, noise may
cause the controller to stall. When a high-noise driver such as an AC servo is connected, please use one of the above
conversion interfaces depending on the kind of interface. Although PIF-422 is an RS-422 output, if an SG terminal is
connected together, it can deal with 5V TTL-level signals.
(A case sold separately: PCML-60S02)
[Specification]
Power source: DC 12V~24V
Input: TLP-552
Output: SN75158P (for 4 axes) (PIF-422)
Input: TLP-552
Output: SN75158P (for 4 axes) (PIF-422)
DC 24V open collector (PIF_400)
Consumed current: [70 mA] (PIF-422)
[30 mA] (PIF-400)
[Accessories]
(1) Connector (HIF-3BA-16D-2.54R)
Hirose *2
(2) Power connector (H4P-SHF-AA)
JST
*1
(3) Contacts (BHF-001T-0.8SS)
JST
*4
CEP-025
ACCEL
CEP-027 PIF-422
ACCEL
(2)
(1)
(3)