Motorola USBW 100 用户手册

Establishing Ethernet Connections 

Establishing Ethernet Connections 

Follow these steps to establish a connection to an Ethernet network.  
1.  Connect the Ethernet port on your computer to an Ethernet jack 

belonging to the network to which you wish to connect. 

2.  Navigate to the Ethernet Main Window by clicking the 

 

button on the right side of the main window.  

3.  Click the 

 button. 

Note: a message stating "No Cable Connected" will be displayed if the 
Ethernet Main Window is accessed when your computer has not been 
attached to an Ethernet network via an Ethernet jack. 
Once you have connected to an Ethernet network, the screen will be 
updated to display a "Connected" status message. 
This box displays the number of packets of data that your computer has 
sent and received over the Ethernet connection since it was established. 
This box contains information about the Ethernet device you are currently 
using. Fields include the following: 

This is the name of your Ethernet network interface card. 

The hardware address of the device.  

The version of the driver for this device that is currently installed on your 
computer. 

The version of the devices on-board operating software. 
To view information about an Ethernet network you are currently 
connected to or the Ethernet device you are using to connect to that