Motorola Automobile Accessories F5218 用户手册

Be sure to consider the following issues when planning the installation:
• Keyboard and display location relative to air bag deployment zones
• Environmental considerations 
• Electrical guidelines
• Liquid Propane (LP) gas warning
• Usability by driver/operator
• Vehicle vendor instructions
• Local vehicle authority regulations/design rules

The MW810 Mobile Workstation is typically installed on a Mounting Trunnion assembly, 

which affixes directly to the vehicle transmission hump or to the tunnel plate (preferred and 

not included in the kit).
Using an optional tall pedestal under the MW810 Mobile Workstation is recommended only 

for use in vehicles where air bag compliance is not required. An example of this is a utility 

van which does not have passenger-side air bags for the given model year.

Correct positioning of the components will ensure that the MW810 Mobile Workstation 

meets the following requirements:
• The display and keyboard are within easy reach of the driver/operator (more difficult due 

to air bag constraints).

• It will not injure the operator or passenger in case of an accident.
• The display does not interfere with the driver’s vision.
• The display and the CPU Box are properly ventilated.
• Place the CPU Box so that it can be easily removed for servicing.
• Do not mount the MW810 Mobile Workstation and route its cables where they can be 

damaged, kicked by the driver’s or other passenger’s foot. 

• Verify that the MW810 Mobile Workstation will not interfere with operation of the vehicle 

and will not hinder the driver when driving the vehicle.

• Verify that the mounting surface is able to support the weight of the display and the CPU 

Box.

When installing the MW810 Mobile Workstation, make sure that the 

CPU Box Mounting Trunnion or any support is tightly anchored to the 

vehicle structure. Wobbly Mounting Trunnion can damage the 

workstation.

To avoid radio Interference, the distance between the display and CPU 

Box mounting locations must be more than 8 inches (20 cm).