Motorola Car Satellite Radio System DSR-6400 用户手册

Use this menu to set the GigE transcoded destination address and the associated port. This menu 
is only operational if the TS Mode field is set to either Transcoded or Transcoded+Passthru. Press 
the  buttons until the Port GigE Xcoder Dest Addr menu appears.

Press the 4 button until the cursor is at the Xcoded Dest Addr label, and press ENTER to move into 

the field. Use the arrow button (4) to enter the desired address and press ENTER to confirm 

the selection and exit the field.

Press the 4 button until the cursor is at the Port label, and press ENTER to move into the field. 

Use the arrow button (4) to enter the desired value and then press ENTER to confirm the 

selection and exit the field.

Use this menu to set the GigE pass through destination address and the associated port. This menu 
is only operational if the TS Mode field is set to either Passthru or Transcoded+Passthru. Press the 
 buttons until the Port GigE PassThru Dest Addr menu appears.

Press the 4 button until the cursor is at the PassThru Dest Addr label, and press ENTER to move 

into the field. Use the arrow button (4) to enter the desired address and then press ENTER 

to confirm the selection and exit the field.

Press the 4 button until the cursor is at the Port label, and press ENTER to move into the field. 

Use the arrow button (4) to enter the desired value and then press ENTER to confirm the 

selection and exit the field.

PORT GigE Xcoded Dest Addr      Port
    E       192.168.054.201        06100

PORT GigE PassThru Dest Addr    Port
    E       192.168.054.200        06000