Brother MFC-4350 业主指南
82
C H A P T E R N I N E
Remote Retrieval
You can call your MFC from any fax machine using touch tone and use a
Remote Access Code and other button presses to retrieve fax messages.
Keep the included Remote Control Access Card in your wallet as an aid.
Remote Access Code and other button presses to retrieve fax messages.
Keep the included Remote Control Access Card in your wallet as an aid.
Using Remote Access Code
1
Dial your fax number from a fax machine using touch tone.
2
When your MFC answers and beeps, immediately enter your Remote
Access Code (1 5 9 ).
Access Code (1 5 9 ).
3
The MFC signals the kinds of messages received:
1 long beep — Fax message(s)
No long beeps — No messages
4
The MFC then prompts you with two short beeps to enter a command.
If you wait longer than 30 seconds to enter a command, the MFC hangs
up. If you enter an invalid command, the MFC beeps three times.
If you wait longer than 30 seconds to enter a command, the MFC hangs
up. If you enter an invalid command, the MFC beeps three times.
5
Press
9
0
to reset the MFC when you finish.
6
Hang up.
If your MFC is set to Manual mode, you can access your machine by
waiting about 2 minutes, then entering the Remote Access Code within 30
seconds.
waiting about 2 minutes, then entering the Remote Access Code within 30
seconds.
See
Changing
Remote Access
Code
p. 81