Lopi WILMINGTON DVS FACE 99500146 产品宣传页

Wilmington DVS Face

Black 99500146 Pewter 99500148

Page 1 of 1

4/20/06

Compatibility:

• DVS Insert

• DVS Fireplace

Packing List:

• Face

• (2) Mounting Brackets

• (4) 10-24 x 1/2” Thread-Cutting Screws

Installation

WARNING: Turn off gas to the appliance

and make sure it has fully cooled prior to

service.

Remove the glass (see the owner’s

manual). On inserts, install the

surround panels.

Install the mounting brackets following

the directions to the right.

Start the pilot (make sure the main

burner is off), and replace the glass

(see the owner’s manual). Install the

cove covers (see the illustration

below).

Attach the mounting brackets to

the heater with the included

screws.

HINT: pre-thread the holes on the

heater before installing the

brackets.

COVE COVERS - DVS FIREPLACE

The cove cover to prevent light from

exiting the grill. It is included with

most DVS Fireplaces or can be ordered

separately (SKU 250-00045). The cove

cover replaces the existing upper glass clip.

COVE COVERS - DVS INSERT

The cove covers prevent light from exiting

the grill. The DVS Insert includes cove

covers. Place them over the glass frame

prior to installing the face.

The face mounts to the brackets as shown in the illustration below.

FACE INSTALLATION

Tilt the face back and insert the

bottom brackets into the bottom

slot until they lock in place. Lift

and rotate the face forward until

the top brackets lock into the

upper slots.

AAAAAAA

Plated Surfaces

Use denatured alcohol and a soft cloth to clean plated surfaces. Marks left on the

surface may damage the face.

Denatured

Alcohol

Soft Cloth