BMW 2006 530xi Sedan 业主指南

Practical interi

acc

ess

orie

118

Reach into the recess and pull toward the front.

When you fold back the backrest, be sure
that the catch engages securely. The red

warning indicator disappears in the recess
when the catch is engaged. If it is not properly
engaged, transported cargo could enter the
passenger compartment during braking or eva-
sive maneuvers and endanger the vehicle occu-
pants.

To ensure that the safety systems con-
tinue to provide optimized protection,

please observe the safety belt information on
page

Separation net

Do not allow the separation net to snap
back, otherwise there is a risk of injury

and the separation net may be damaged.

With normal cargo area

Pull the separation net out of the case by the
loop. Grasp the rod on both sides and insert it in
the brackets, arrow

1. This is best carried out

from the rear seat.
When you no longer required the separation
net, grasp the rod on both sides and remove it
from the brackets, arrow

2. Then slowly allow

the separation net to glide into the case.

With larger cargo area

Fold over both rear backrests, refer to
Increasing cargo area.

Unlock the case on both sides with the but-
tons, arrow

Pull out the case downward, arrow

2; avoid

tilting when doing so.

Push the case into the guides on the back of
the seat backrests.

Carefully pull out the separation net and
insert it in the front brackets as described in
With normal cargo area. This is best carried
out from the front seat.

To restore the original state, proceed in the
reverse order. Finally, lay the case in the two
side brackets and then press forward until it
engages. The red warning indicator disappears
in the recess when the catch is engaged. Check
whether the case is properly locked in place by
pulling it with a sudden movement.

Compartment in floor

Automatic roll-up cover: the opened floor panel
strikes against the roll-up cover in the end posi-
tion. If necessary, unhook the roll-up cover at
the rear before opening the floor panel.