Lenco Portable DVD Player DVP-70 用户手册
10
Using the Battery Pack
Installing the battery pack
Align and insert the battery pack into the
corresponding slots on the back of the unit.
corresponding slots on the back of the unit.
Slide the battery pack to the left
until it clicks into place.
Removing the battery pack
Slide down the latch.
Slide the battery pack to the right, and remove.
Charging the battery pack
1.Turn off the unit by sliding POWER ON/OFF to OFF.
Note: When the player is turned on, the battery will not be charged.
2.Attach the battery pack to the unit.
3.Connect one end of the AC cord to the jack on the AC adaptor.
4.Plug the other end of the AC cord into an AC outlet.
5.Connect the DC cord to the DC IN 12V jack on the DVD player.
Note: When the player is turned on, the battery will not be charged.
2.Attach the battery pack to the unit.
3.Connect one end of the AC cord to the jack on the AC adaptor.
4.Plug the other end of the AC cord into an AC outlet.
5.Connect the DC cord to the DC IN 12V jack on the DVD player.
1.The LED lights ( orange color ), and charging begins.
2.When battery is fully charged, the LED turns to red.
2.When battery is fully charged, the LED turns to red.
OPEN