Monogram ZGP486LRRSS 规格说明表单

下载
页码 3
For answers to your Monogram,
® 
GE Profile
 or 
GE
®
 appliance questions, visit our website at 
geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
130566
Specification Created 12/10
Listed by 
Underwriters 
Laboratories
ZGP486NRRSS (Natural Gas)
ZGP486LRRSS (Liquid Propane)
GE Monogram
® 
48" All-Gas Professional Range with 6 Burners and Grill
Dimensions and Installation Information (in inches) 
Professional ranges offer a number of choices in size and 
cooktop configurations.
 All Professional Ranges are factory set for natural or liquid 
propane gas. The correct model should be ordered for the 
installation situation.
Note: Conversion kits are included with the range if the wrong 
gas type was ordered. High Altitude kit, WB28K10553 for 
operation above 6,000 feet (for Natural and LP gas models), is 
also available. The kits must be installed by a qualified service 
technician at additional cost.
Installation Information
Before installing, consult installation instructions packed 
with product or online at Monogram.com for current 
dimensional data.
A suitable 48" or wider vent hood is required for installation 
over ranges with a grill and recommended for all other 
ranges.
Advance Planning
Refer to dimensional drawings 
for appropriate placement and 
necessary clearances when 
planning the installation.
•  Working areas adjacent to the 
range should have 18" minimum 
clearance between countertop 
and cabinet bottom.
•  Clearance between range and side 
wall or combustible material must 
be at least 12" on each side.
•  Installation must conform with 
local codes. In the absence of local 
codes, the range must comply 
with the National Fuel Gas Code, 
ANSI Z223.1-1990.
3-1/4”
to 4-3/4”
Toekick/
Leg Height
Countertop
to Cooking
Surface
Depth
to Front
of Door
28-1/4”
1-1/2”
47-7/8”
Width
35-1/4”
to
36-3/4”
Height