Dacor RGC304SLP 手册

9

Care and Cleaning

Cleaning the Igniters and Other Burner 

Components

Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

IMPORTANT: The igniters will not work properly if 

the burner caps, burner heads, burner bases or the 

igniters themselves are not clean. Dirty or wet ignit-

ers may not spark at all.
After dissembling the burners, check for any dirt or 

grime deposited on the individual parts, including 

the igniters.

Clean completely around the igniter, including 

1. 

over and under the edge of the metal top and 

porcelain base. A firm toothbrush is ideal for this 

task. Use care while cleaning because the porce-

lain is fragile and can crack or break. Do not use 

water to clean the igniters. If necessary, use a 

small amount of rubbing alcohol to help dissolve 

grime

Examine the burner heads. Remove anything 

2. 

stuck in the holes with a straightened paper 

clip, wire or needle. Be careful not to scratch or 

damage the ring and head. Do not distort the 

shape of the burner head holes. Since the burner 

heads for the SimmerSear™ burners are not 

removable, they must be cleaned in place.
Clean all the burner parts, including the burner 

3. 

bases, with window cleaner or rubbing alcohol. 

Use a cleaning brush with plastic bristles or a 

firm tooth brush. When done, rinse the parts 

well with clean water. Dry all the parts thor-

oughly before re-assembling them.

Reassemble the cooktop according to the burner 

4. 

and grate assembly instructions on page 5. 

Test the burners after reassembling them. If 

the flame is uneven, be sure that all the burner 

parts are properly positioned, then check for any 

remaining dirt or grime on the burner parts or 

igniter. If erratic clicking is still present, make 

sure the igniter is completely dry. If the unit still 

exhibits problems after drying, call your local 

Dacor Authorized Service Agent.

Cleaning Stainless Steel Surfaces

Always wipe stainless steel (silver colored) surfaces with 

the grain. To prevent scratching, do not use abrasive 

cleaners or scrubbers on stainless steel surfaces.

Clean stainless steel surfaces with a mild solu-

•

tion of detergent and warm water. Rinse and dry 

with a soft, lint-free cloth.
You may also use Dacor Stainless Steel Cleaner 

•

on the stainless steel surfaces. Use it according 

to the directions on the package.

Cleaning the Knobs and Trim Rings

Turn the knobs to the off position to remove the 

1. 

knobs and trim rings for cleaning or replace-

ment.
Disconnect the cooktop power plug from the 

2. 

electrical outlet.
Grasp each knob and pull straight up to remove.

3. 

The trim rings may be removed for cleaning if 

4. 

necessary. Take note of the position of each trim 

ring before removal. Grasp each trim ring and 

pull straight up to remove.

Wash the knobs and trim rings with a solution 

5. 

of warm soapy water. Dacor recommends hand 

dishwashing liquid.

 

 

 

 

Valve Shaft

Trim Ring

Knob

Standard 

Burner Base

Base

SimmerSear 

Burner Head

Igniter

Igniter