Dacor REMP3 安装指导
6
Installing the ILB
Mount the ILB using the 4 screws, isolation
grommets and washers provided in the Parts
Bag, included in the Instruction Envelope.
Installing the REMP
Mount the REMP to the wall or roof using
screws, through mounting trim flange.
Verifying Proper Operation
1. Temporarily re-install the remote blower
cover, using 2 screws per side (REMP
ONLY).
2. Turn on the power supply at the circuit
breaker.
3. Refer to Ventilator Installs for further
instructions on verifying the proper
operation.
NOTES:
If the remote blower does not
operate properly, follow these
troubleshooting steps:
1. Verify that power is being
supplied to the Ventilator and
the remote blower.
2. Check the electrical
connections to ensure that
the installation has been
completed correctly.
3. Repeat the above test.
4. If the appliance still does not
work, contact an authorized
DACOR service company.
If you are unable to locate
a DACOR Servicer, please
contact DACOR at (800)
793-0093, or visit us on the
web at www.dacor.com. Do
not attempt to repair the
appliance yourself. DACOR
is not responsible for service
required to correct a faulty
installation.