Houzer CTD3350 安装指导
6. Loosely attach mounting brackets to the countertop,
parallel to the cutout opening using proper fasteners.
(Fasteners are not included with sink. The type of
screws or inserts used depends on the material of your
countertop and should be recommended by your
countertop supplier.)
(Fasteners are not included with sink. The type of
screws or inserts used depends on the material of your
countertop and should be recommended by your
countertop supplier.)
7. Clean sink flange and underside of cutout area of countertop, making sure that the area is smooth and free
from grease. Apply continuous bead of silicone caulk evenly on top of sink flange.
Figure 5
8. Position and align sink over the countertop opening
and press sink onto countertop. Turn bent end of
mounting bracket to snug over the sink rim.
mounting bracket to snug over the sink rim.
Figure 6
9. Check alignment of sink again and tighten fasteners to secure sink.
10. Wipe away excess silicone caulk with a damp cloth. Connect drain and water supply according to
manufacturer's instructions.
5.
Locate and drill holes on the underside of the counter top,
approximately 1" from edge of the sink to be installed.
Holes should be evenly spaced approximately 6" to 8"
apart starting from every corner as shown in Figure 4.
It is recommended to install a faucet at this point before
installing the sink. (Figure 5)
Holes should be evenly spaced approximately 6" to 8"
apart starting from every corner as shown in Figure 4.
It is recommended to install a faucet at this point before
installing the sink. (Figure 5)
Figure 4
3