Summit SWC6GCSS 使用和维护

 

It is recommended you install the wine cooler in a place where the ambient 
temperature is between 72-78 degrees Fahrenheit. If the ambient temperature is 
above or below recommended temperatures, the performance of the unit may be 
affected. For example, placing your unit in extreme cold or hot conditions may 
cause interior temperatures to fluctuate. 

 

Recommended Temperatures for Chilling Wine  

 

Red Wines: 

 

60-65°F 

Dry/White Wines:  

50-57°F 

Sparkling Wines: 

45-50°F 

Rose Wines:   

49-51°F 

 

There is also an 8-10°F variance between the top and bottom shelves of the wine 
cellar. So if you would like to place a mix of white and red wines, you may want 
to place the white wines on the bottom shelves and the red wines on the top 
shelves. 

 

 

•  Turn the temperature control to off, unplug the appliance and remove the 

contents. 

•  Unplug the wine cooler and remove the bottles and shelves.  
•  Wash the inside with warm water and baking soda solution. The solution 

should be about 2 tablespoons of baking soda to a quart of water.  

•  The outside of the wine cooler should be cleaned with a mild detergent 

and warm water.  

•  It may also be necessary to periodically wipe the bottom part of the 

storage area, as the wine cooler is designed to retain humidity 
(condensation may collect there). 

 

Most power failures are corrected within a few hours and should not affect  
temperature of your wine cooler if you minimize the number of times the  
door is opened. If the power is going to be off for a longer period of time, you 
need to take the proper steps.  

 

•  Remove all the bottles. 

•  Securely tape down all loose items inside your wine cooler.  
•  Turn the leveling screws up to the base to avoid damage. 

•  Tape the doors shut 

•  Be sure the wine cooler stays in the upright position during transportation. 

 

Instructions for Use