TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P 用户手册
产品代码
TL-PS110P
your print server unit. After assigning an IP address, the print server can b
accordingly.
accordingly.
e configured
The first step to install a print server on a TCP/IP network is to assign the print server an IP
1. Use the Network Print Monitor utility.
2. Manually specify (using DOS commands or UNIX text-mode commands. This
2000/XP/2003 and UNIX systems).
Assigning an IP Address
address and other related TCP/IP settings before the print server can function. You can
select the following two methods to specify an IP address the print server. Each method will
be detailed in the following section.
select the following two methods to specify an IP address the print server. Each method will
be detailed in the following section.
applies to Windows NT/
Note: The Network Print Monitor can only search for the print server(s) over the same
network segment the Windows NT/2000/XP/2003/UNIX computer is located. You
would like to install a print server on a different network segment.
would like to install a print server on a different network segment.
DHCP
he print server supports DHCP feature, allowing the print server to obtain an IP address and
By de
indows NT LPR Port Printing Installation
Start, point to Settings, and select Printer.
. Click
Add Port.
LPR Port.
T
related TCP/IP settings automatically from a DHCP server. While the print server supports
DHCP, we strongly recommend you manually specify a fixed IP address to the print server.
related TCP/IP settings automatically from a DHCP server. While the print server supports
DHCP, we strongly recommend you manually specify a fixed IP address to the print server.
fault, the print server’s DHCP function is disabled.
W
. Click
1
2. Run
2. Run
Add Printer.
3. The Add Printer Wizard screen will appear, Select My Computer and click Next.
4
.
From the Printer Ports box as shown in the following picture, select the
5
53