Capital MWOV302ES 手册
12
POSITIONING OVEN RACKS
• Your oven comes with Capital Roller Racks which effortlessly move in and out of the oven on bearing
rollers.
• To completely remove a rack from the oven, before the oven is hot, grasp the rack on both the right and
left sides and lift the rack up while allowing the roller brackets to rotate downward.
• This will release the rack from the retaining grooves in the oven side wall.
• To insert a rack, determine the desired rack position and, with the roller brackets facing down, place the
• To insert a rack, determine the desired rack position and, with the roller brackets facing down, place the
rack into the oven at the desired height.
• Rotate the roller brackets up towards the walls of the oven while positioning the wheels within the desired
positioning grooves.
• Make sure all four rollers are seated within the grooves for a secure rack position.
SETTING THE OVEN
• Know which oven mode is to be used and the temperature setting.
• DOUBLE: If setting a Double Oven either the UPPER or LOWER oven must be selected by pressing one
• DOUBLE: If setting a Double Oven either the UPPER or LOWER oven must be selected by pressing one
of the control panel buttons.
o
The selected oven button will be indicated by a small light in the center of the button.
o
Each oven must be set separately and can use independent modes.
o
If SELF CLEAN is used in either oven, the other oven will not be functional until the SELF CLEAN
cycle is complete.
• Press the MODE dial to start MODE selection.
• All MODE icons will illuminate.
• All MODE icons will illuminate.
• Rotate the MODE dial to toggle between modes.
o
Modes will change from top to bottom when the dial is turned clockwise and bottom to top when
turned counterclockwise.
• When the desired mode is highlighted, check the set temperature next to the Time of Day display.
o
Different modes will display different default temperatures based on typical recipe settings.
o
If the temperature needs to be adjusted, use the TIME/TEMPERATURE dial to adjust up or down.
• When the mode and temperature have been correctly selected, press the START button to begin.
• NOTE: If START is not pressed within 10 seconds, the selected mode and temperature will be
• NOTE: If START is not pressed within 10 seconds, the selected mode and temperature will be
cancelled and the display will return to Time of Day or the active functions of the opposite oven
of a double oven.
of a double oven.