Cisco Flex. Pack Insp. Right-To-Use Feat Lic, ASR1000 Series FLASR1-FPI-RTU 用户手册
产品代码
FLASR1-FPI-RTU
Ordering Guide
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 16
Cisco ASR 1000 Series Aggregation Services Routers
Ordering Guide
Ordering Guide
This guide provides an overview and guidance on how to order and configure the Cisco
®
ASR 1000 Series Aggregation Services Routers with their respective hardware
components, Cisco IOS
®
XE Software, and feature licenses. It first addresses ordering of
individual components, including hardware, software, and licenses. Several ordering
examples, including bundles, of typical deployment then follow. Finally, a list of part
numbers, also referred to as Product Identifiers (PIDs), are included. Readers should have
some basic knowledge of Cisco ASR 1000 Series Routers and network services, such as
router configurations and features required for deployment.
Overview
Cisco ASR 1000 Series Router, a versatile midrange integrated services router, can be deployed in
broadband aggregation, enterprise network, service provider edge, IP Radio Access Network (IP
RAN), and many other network applications.
When ordering a Cisco ASR 1000 Series Router, consider the following:
●
Hardware
◦
Chassis: Cisco ASR 1002, 1004, or 1006 models (ASR1002, ASR1004, or ASR1006,
respectively)
◦
Cisco ASR 1000 Series Route Processor: ASR1000-RP1 or ASR1000-RP2, memory, hard
disk, and USB flash memory token
◦
Cisco ASR 1000 Series Embedded Services Processor (ESP): 5-,10-, 10-N- and 20-Gbps
ESPs (ASR1000-ESP5, ASR1000-ESP10, ASR1000-ESP10-N and ASR1000-ESP20,
respectively)
◦
Cisco ASR 1000 Series SPA Interface Processors (SIPs): (ASR1000-SIP10)
◦
Shared port adapters (SPAs)
●
Cisco IOS
®
XE Software
●
Cisco ASR 1000 Series feature licenses
Ordering Cisco ASR 1000 Series Router Hardware
This section discusses how to order Cisco ASR 1000 Series Router hardware, including a Cisco ASR
1000 Series chassis, the route processor (RP) and its modular components, the respective ESPs,
the SIP, and—depending on the WAN and LAN connectivity needs—the SPAs.
Chassis
Cisco ASR 1000 Series Routers have three form factors:
●
2RU (Cisco ASR 1002 Router)
●
4RU (Cisco ASR 1004 Router)
●
6RU (Cisco ASR 1006 Router)