Miele DA5196WSS 安装指导
Installation
33
a
3 protective installation sheets
for use when installing the chimney
b
1 exhaust connector
for an exhaust duct 6" (150 mm).
c
1 reducer
for an exhaust duct 5" (125 mm).
d
1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
e
Telescopic wall bracket
for securing the hood on the wall.
f
Recirculation kit for recirculation
mode
contains diverter, aluminum hose
and hose clamps (not contained in
scope of delivery, available as
optional accessory – see "Technical
Data").
6 screws 1/2" x 2 3/8" (5 x 60 mm)
and
6 plugs 5/16" x 2" (8 x 50 mm)
for attaching to the wall. Plugs not for
use in USA / CDN.
The screws and plugs are designed
for use in solid walls only.
Use different fasteners for other wall
Use different fasteners for other wall
construction types.
Make sure that the wall can support
Make sure that the wall can support
the load.
2 x M 6 lock nuts
for mounting the appliance unit.
2 screws 1/8" x 5/16" (3.9 x 7.5 mm)
for attaching the chimney.
1 lever
for disassembling the chimney.
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation sheet