Viking RVGR33015BWH 安装指导

14

15

1

1

1

2

3

2

Legs are packed in the cardboard top pack. 

Note:

Legs should be installed near to where

appliance is to be used, as they are 

not secure for long transit.

Note: 

It is strongly recommended

that a pallet or lift jack be used rather than tilting.

Raise unit about a foot. Unscrew temporary legs 

from couplings

. 

4

Lower range gently to keep any undue strain from

legs and internal mounting hardware.

3

Screw legs into couplings on all 

four corners.  

Leg Installation

1

2

Measure the four corners in cutout area to verify if

flooring is level. 

For uneven or sloped floors, level unit with 

metal shims only, as the adjustment required may

exceed the thread available in the leg.

3

3/8”

3/

8”

 

(0.95 cm)

(0.

95

 cm

)

3/8”

 

(0.95 cm)

4

Move unit into opening.

Leveling/Adjustments/Alignment

5

Check that unit is level side to 

side and front to back. Side trim of the high corner

must be 3/8” (0.95 cm) above countertop.

If leveling is required, move unit out of opening.

6

Lift unit and prop on wood blocks.