Frigidaire FGMC2765P 业主指南

下载
页码 48
40
STEAM CLEAN
The steam clean feature offers a chemical-free and 
timesaving method to assist in the routine cleaning of your 
oven. Steam clean may be used before manually cleaning 
the oven to help loosen soils on the oven bottom.
STEAM-CLEANING
CAUTION
Do not add ammonia, oven cleaners, or any other 
household cleaners or chemicals to the water used in the 
steam clean cycle. 
Before manually cleaning any part of the range, be sure 
all controls are turned off and the range is cool. The range 
may be hot and can cause burns.
IMPORTANT
•  For best results, clean oven immediately after cycle is 
complete.
•  Steam clean works best for soils on oven bottom. For 
removal of baked on soils oven may require a deeper 
cleaning. See Self Cleaning Operation.
•    It is normal if some water vapor or condensation appears 
close to the oven vent. Wipe with soft cloth or sponge 
when steam clean cycle is complete.
•  The oven gasket may become damp. Do not wipe dry. 
Open door and allow gasket to air dry.
• Steam clean cannot be programmed with a Delay 
Start.
•  If the door is opened during the steam clean cycle, a 
beep will sound and d-O will appear in the display. Keep 
oven door closed during the Steam Clean cycle.
•  Local water sources can contain minerals (hard water) 
and will leave deposits on the oven cavity. If this occurs, 
wipe cavity with vinegar or lemon juice.
•  For best results use only distilled or fi ltered water in a 
Steam Clean cycle.
To set a steam clean cycle:
1.  Oven should be at room temperature. Remove all racks 
and oven accessories.
2.  Scrape or wipe loose debris from the oven bottom.
3.  Pour 8 oz (235 ml) distilled or fi ltered water onto the 
oven bottom. Close the oven door. 
4. Press 
STEAM CLEANStC will show in the display.
5. Press 
START.
6.  If the door is not completely closed a door open message 
(d-O) will appear and the steam clean will not start until 
the door is fully closed. The door should remain closed 
during the steam clean operation.
7.  Steam clean is a 20 minute cycle. Remaining time will 
show in the display. An alert tone will sound at the end 
of the steam clean cycle. Press off to return display to 
the clock.
8.  When the steam clean cycle is over, stand to the side 
of the door to avoid any steam escaping the oven. 
The cycle includes a cool down period allowing you to 
immediately use a soft cloth or sponge to remove any 
remaining water. Wipe oven cavity bottom. Do not clean 
the oven door gasket.
To turn steam clean off at any time, press OFF.
Areas to clean and area (gasket) to avoid.