Frigidaire FGEW3065PW 业主指南

下载
页码 31
24
OVEN CONTROLS
Steam Clean
The steam clean feature offers a chemical-free and time-
saving method to assist in the routine cleaning of your oven. 
Steam clean may be used before manually cleaning the 
oven to help loosen soils on the oven bottom.
 
To set a steam clean cycle:
1.
Oven should be at room temperature. If the oven tem-
perature is above the room temperature, steam clean 
will not start. Be sure the oven is cool. Remove all racks 
and oven accessories.
2.
Scrape or wipe loose debris from the oven bottom. 
3.
Pour 8 oz (235 ml) distilled or filtered water onto the 
oven bottom (See 
). Close the oven door.
  
4.
Press steam cleanStCn will show in the display (See 
 
5.
Press start.
6.
Steam clean is a 20 minute cycle. Time remaining is 
shown in the display. 
7.
An alert will sound at the end of the cycle, and the End 
message will show in the display. Press off to return to 
the clock.
8.
When the steam clean cycle is complete, stand to the 
side of the oven out of the way of escaping vapor when 
opening the oven door. The cycle includes a cool-down 
period, so you may immediately use a soft cloth or 
sponge to remove any remaining water. 
9.
Wipe oven cavity and bottom. Do not clean oven door 
gasket (See 
).
 
For best results, clean oven immediately after the cycle is 
complete. Steam clean works best for soils on the oven 
bottom. Removal of especially stubborn or baked-on soils 
may require a manual cleaning. See instructions in the 
Some condensation or water vapor may appear close to the 
oven vent. This is normal. The oven gasket may become 
damp; do not wipe dry. Open door to broil position and allow 
to air dry.
Local water sources often contain minerals (hard water) 
and will leave deposits on the oven cavity. If this occurs, 
wipe cavity with vinegar or lemon juice. Use distilled or 
filtered water.
If the door is opened during the steam clean cycle, a beep 
will sound and d-0 will show in the display. Close the oven 
door. Keep oven door closed during steam clean cycle.
Steam clean cannot be programmed with a delay start. If 
steam clean results are not satisfactory, run a self clean. 
See 
Do not add ammonia, oven cleaners, or any other 
household cleaners or chemicals to the water used in the 
steam clean cycle. 
Before manually cleaning any part of the oven, be sure all 
controls are turned off and the oven is cool. The oven 
may be hot and can cause burns.
Figure 15:
 Add 8 ounces of distilled water
Figure 16: Steam clean selected
CAUTION
Figure 17: Clean around the oven door gasket