GE PP9830 规格说明表单

下载
页码 3
Dimensions anD installation information
Listed by 
Underwriters 
Laboratories
PP9830Dj/tj 
GE Profile
™ 
Series 30" Downdraft Electric Cooktop
 
For answers to your Monogram
® 
or GE
®
 appliance 
questions, visit our website at geappliances.com  
or call GE Answer Center
®
 service, 800.626.2000.
Specification Revised 4/15
21
7
8
ʺ
(21
15
16
ʺ SS)
20
1
2
ʺ
22ʺ
29
3
4
ʺ
2
3
16
ʺ
(2
1
4
ʺ SS)
28
3
4
ʺ
(29
13
16
ʺ SS)
Wall InstallatIon: Wall 
installations require 25" countertop 
depth. When cabinet is flush against the 
wall, the fan housing can be rotated to 
the horizontal position for direct venting through rear wall. 
Make a countertop cutout in the range cabinet according 
to unit dimensions and installation type. Duct hole is 
positioned in back of cabinet for through-the-wall ducting. 
PenInsula or Island InstallatIon: For 
peninsula/islands a minimum 26" countertop depth is 
suggested. Blower should be in vertical position. Island or 
peninsula cabinets may require adjustment in cutout depth 
and/or location within the width dimensions. Duct hole is 
positioned in bottom of cabinet for island  
or peninsula installation.
slab InstallatIon: For peninsula or island 
installation and rear wall ducting, 6" PVC duct or locally 
approved piping should be used if installing under a 
poured concrete slab.
recePtacle locatIon: Install an approved junction 
box within shaded area shown in diagram. Junction box 
must be at least 10-1/2" below top of cabinet.
InstallatIon InformatIon: Before installing, 
consult installation instructions, packed with product,  
for current dimensional data. 
note: Electrical cable is not supplied with unit.
Order part number JXCK89 from your Ge Appliances 
Dealer
These cooktops are approved for indoor use only.
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*UL Requirement.
Note: A 6" minimum spacing to adjacent side wall is required
20
9
4
10-1/2
16
C
L
Cabinet Dimensions (in inches)
*Note: A 6" minimum spacing to adjacent side wall is required 
Dimension and installation information are shown in inches.
KW RATING
240V
9.1
208V
6.9