Viking TVDR4804IAW 安装指导

13

To avoid risk of electrical shock, personal injury 
or death; verify your appliance has been properly 
grounded in accordance with local codes or in 

absence of codes, with the National Electrical Code (NEC) ANSI/
NFPA-70 – latest edition.

To avoid risk or electrical shock, personal injury 
or death; grounding product to the frame of the 
unit may or may not be permitted through your 

local codes. If ground to the frame is not permitted then a 4 
conductor power cord must be used.

See Electrical Requirements information.  Where local codes do not permit grounding through neutral, use a 4-wire power supply 
cord. The cord or conduit must be secured to the range with the strain relief bracket.  The electrical connection is made at the 
terminal block, which is located behind the access door on the back of the range.

1

2

4

3

Remove access door.

Remove supply cord strain relief 

bracket and three supply cord mounting screws

on terminal block.

Feed supply cord up through hole in bottom 

of range back.

Attach line #1 (red) and line #2 (black)  leads to 

outside terminal. Attach neutral wire (white) to 

center terminal on the terminal block.