Whirlpool WOD51ES4 使用和维护

Turns off all tones, including the end of cycle tone and key press 
tones.
1. Press SETTINGS/CLOCK until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

Sets the pitch of the tone to either high or low.
1. Press SETTINGS/CLOCK until “SOUND VOLUME” is 

displayed.

2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS/CLOCK until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS/CLOCK until “KEYPRESS TONE” is 

displayed.

2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

Turns off the short repeating tone that sounds every 1 minute after 
the end of cycle tones.
1. Press SETTINGS/CLOCK until “REMINDER TONE” is 

displayed.

2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

1. Press SETTINGS/CLOCK until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

IMPORTANT: This feature is intended for use on the sales floor 
with 120V power connection and permits the control features to be 
demonstrated without heating elements turning on. If this feature is 
activated, the oven will not work.
1. Press SETTINGS/CLOCK until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

The oven control is set to automatically shut off the oven 12 hours 
after the oven initiates a cook or clean function. This will not 
interfere with any timed or delay cook functions.
1. Press SETTINGS/CLOCK until “12 HR AUTO OFF” is 

displayed.

2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.

Language options are English, Spanish and French. 
1. Press SETTINGS/CLOCK until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypad as instructed by the scrolling 

text to select the new language.

4. Press CANCEL to exit and display the time of day.

IMPORTANT: Do not use a thermometer to measure oven 
temperature. Elements will cycle on and off as needed to provide 
consistent temperature, but they may run slightly hot or cool at 
any point in time due to this cycling. Most thermometers are slow 
to react to temperature change and will not provide an accurate 
reading due to this cycling.

The oven provides accurate temperatures; however, it may cook 
faster or slower than your previous oven, so the temperature can 
be adjusted to personalize it for your cooking needs. It can be 
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:

1. Press SETTINGS/CLOCK until “TEMP CALIB” is displayed.
2. The current setting will be displayed. Press the “1” keypad to 

toggle between the upper and lower ovens. 

3. Press START for the selected oven to select the choice 

displayed in Step 2. Wait several seconds for the display to 
change or press START for the selected oven, and then 
continue with Step 4.

4. Press the “3” keypad to increase the temperature in 5°F (3°C) 

increments, or press the “6” keypad to decrease the 
temperature in 5°F (3°C) increments. The range is from -30°F to 
+30°F (-18°C to +18°C).

5. Press START.
6. Press CANCEL for the selected oven to exit and display the 

time of day.