Viking RVDR33015BSSLP 安装指导

17

16

2

1

1

3

2

1

2

Remove access door.

Remove supply cord strain relief 

bracket and three supply cord mounting screws on 

the terminal block.

Electrical Connection (4-wire)

Electrical Connection (3-wire) 

(cont.)

WARNING

To avoid risk or electrical
shock, personal injury or death;

grounding product to the frame of the unit
may or may not be permitted through
your local codes. If ground to the frame is
not permitted then a 4-conductor power
cord must be used.

WARNING

To avoid risk of electrical shock,
personal injury or death; verify

your appliance has been properly
grounded in accordance with local codes
or in absence of codes, with the National
Electrical Code (NEC) ANSI/NFPA-70 –
latest edition.

Use a 4-wire power supply cord kit rated for
40 amps – 125/250 volts with closed loop
terminals and marked for use with ranges. 

Where local codes do not permit grounding
through neutral, use a 4-wire power supply
cord. The cord or conduit must be secured
to the range with the strain relief bracket.

The electrical connection is made at the
terminal block, which is located behind the
access door on the back of the range.

2

1

3

Remove grounding screw. Cut-off 

and discard ground strap.

1

2

4

1

3

5

Attach line #1 (red) and line #2 (black) 

leads to outside terminal. Attach neutral wire (white)

to center terminal on the terminal block.

Push supply cord toward terminal 

block to relieve strain, reattach supply cord strain relief

bracket over supply cord.

1

2

6

Reattach access door.

1

1

Eyelet Connection

Bare Wire Connection

To make a bare wire connection, use holes on the left

side of the terminal block. To connect eyelet style

wires, use holes on right side of terminal.