Amana AE123G35AX 手册

Option 1 —Wood, metal or plastic molding

When you are using wood, metal or plastic molding, the wood
frame should line up with inside wall as shown.

Option 2 —Plastered wall with no molding

If the plastered wall is to be flush with the cabinet and no molding
is used, the wood frame must be set

¹⁄₂" (13 mm) into the inside

wall.

Install Wood Frame

1. Construct wood frame. See “ Location Requirements” for

dimensions.

2. Measure outside width and height of frame to determine wall

opening dimensions.

3. Cut opening through the wall. Remove and save insulation.

NOTES:

■

Dimension for depth depends on wall thickness and type
of molding.

■

Do not block louvers in air conditioner cabinet.

■

Use 1" (2.5 cm) or thicker lumber for wood frame.

4. Apply wood preservative to the outside exposed surface.

5. Insert the frame in the wall opening. Square and level frame.

6. Attach frame securely to the wall.

Install Cabinet into Wood Frame

1. Insert cabinet into the framed wall opening.

The top of the cabinet should extend

¹⁄₂" (13 mm) into the

room. If there is trim, the cabinet should extend

¹⁄₂" (13 mm)

past the trim.

2. Use a level to check that cabinet is level side to side.

3. Check that air conditioner cabinet is tilted to the outside so

that water will run to the outside.

/2 bubble on carpenters

4. Reuse the insulation to seal opening between cabinet and

frame.

5. Use existing holes and 6 - #10 x

1" wood screws (not

provided) to attach cabinet to frame.

NOTE: Do not overtighten screws or cabinet will distort and
provide a poor air seal between cabinet and air conditioner.

6. Caulk all outside wall openings around cabinet.

A. Molding
B. Inside wall

C. Wood frame
D. Louvers

A. Plastered wall
B. Inside wall

C. Wood frame
D. Louvers

A. Outside width
B. Outside height

C. Depth

¹⁄₂" (13 mm) extending into room

B. Trim

A. Level

level.