Speed Queen ADEE8RGS173TW01 安装指导

8. Using screwdriver, remove two door plugs, and reinstall on

opposite side of door opening.

D317S_SVG

Figure 22

9. Reinstall four hinge attaching screws, removed in Step 1.

D606I_SVG

Figure 23

Wipe Out Inside of Dryer

Before using dryer for the first time, use an all-purpose clean-
er, or a detergent and water solution, and a damp cloth to re-
move shipping dust from inside dryer drum.

D604I_SVG

Figure 24

Plug In the Dryer

This appliance is to be supplied through a residual current device
(RCD) having a rated residual operating current not exceeding 30
mA.

Electric Dryer

Connect the dryer to an electrical power source. Refer to Connect
Electrical Plug section for information on connecting power cord.

Connect to 30 Amp Circuit

D275I_SVG2

Figure 25

Gas Dryer

Dryer requires 120 Volt, 60 Hertz electrical supply and comes
equipped with a 3-prong earth/ground plug. Refer to serial plate
for specific electrical requirements.
NOTE: The wiring diagram is located in the control
hood.

WARNING

To reduce the risk of fire, electric shock, serious in-
jury or death, all wiring and grounding MUST con-
form with the latest edition of the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1, and such local regulations as
might apply. It is the customer’s responsibility to
have the wiring and fuses installed by a qualified
electrician to make sure adequate electrical power is
available to the dryer.

W521

When plugging in the dryer:

• DO NOT overload circuits.
• DO NOT use an extension cord.
• DO NOT use an adapter.
• DO NOT operate other appliances on the same circuit. Use

separately fused 15 Amp circuits.

The dryer is designed to be operated on a separate branch, polar-
ized, three-wire, effective earth/ground, 120 Volt, 60 Hertz, AC

Installation

Part No. 514319R1