Amana AH093G35AX 手册
9
Attach Side Curtains
1. Locate provided bag of screws.
2. Insert top and then bottom of right-hand curtain housing in
top and bottom curtain guides on air conditioner cabinet.
Back View
Bottom View
3. Extend right-hand curtain outward so you may insert the
first screw through the middle hole of the curtain. Using
#10 x
#10 x
¹⁄₄"
pan-head Phillips screw
,
screw curtain to middle
hole in air conditioner cabinet.
NOTE: This screw is required to correctly attach curtain (top
to bottom) to the air conditioner cabinet.
to bottom) to the air conditioner cabinet.
4. While the right-hand curtain is still extended, insert
#10 x
¹⁄₄" pan-head Phillips screws into the top and bottom
slots of curtain. Screw curtain to the top and bottom holes
in air conditioner cabinet.
in air conditioner cabinet.
NOTE: Some curtains may have 2 slots at each end. You will
be able to see a mounting hole through the correct slot.
be able to see a mounting hole through the correct slot.
5. Slide curtain housing into guides as far as it will go.
6. Repeat above steps for left-hand curtain.
Attach foam adhesive seal
Attach foam adhesive seal along the bottom of the curtain
bottom channel.
bottom channel.
Install Cabinet into Window
■
Handle air conditioner gently.
■
Be sure your air conditioner cabinet does not fall out of the
opening during installation or removal.
opening during installation or removal.
■
The location where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded 3
prong outlet.
should be no more than 4 ft (122 cm) from a grounded 3
prong outlet.
■
Do not block the louvers on the front panel.
■
Do not block the louvers on the outside of the air conditioner.
1. Center empty cabinet in window. Check that lower rail of air
conditioner cabinet is behind and against back side of
windowsill. Main tain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet in place.
windowsill. Main tain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet in place.
2. Measure the distance between the right-hand side of the
cabinet and the inside of the window channel.
3. Repeat for the left side. Adjust the cabinet until the distance
on each side is the same.
A. Curtain housing
B. Curtain guides
B. Curtain guides
A. Curtain housing
B. Curtain guides
B. Curtain guides
A
B
A
B
A. Curtain housing
B. Foam adhesive seal
B. Foam adhesive seal
A. Window sash
B. Empty cabinet
B. Empty cabinet
C. Window channel
A
B
B
A
C
Top channel must be on inside room of window sash.
Windower sash
Top channell