Frigidaire FGGC3045QS 业主指南

下载
页码 10
5
WARNING
This appliance is equipped with a 3-prong grounding 
plug for your protection against shock hazard and 
should be plugged directly into a properly grounded 
receptacle. DO NOT cut or remove the grounding 
prong from this plug.
WARNING
Personal injury or death from electrical shock may 
occur if the range is not installed by a qualifi ed installer 
or electrician.
WARNING
Avoid fi re hazard or electrical shock. DO NOT use an 
adapter plug, an extension cord, or remove grounding 
prong from electrical power cord. Failure to follow this 
warning can cause serious injury, fi re or death.
IMPORTANT SAFETY INSTRUCTIONS
CONVERSION TO LIQUEFIED PETROLEUM 
GAS (OR L.P. GAS)
This natural gas range is designed to allow for conversion 
to Liquefi ed Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact the service center 
for assistance. The L.P. Conversion Kit is provided with 
this cooktop and is located in the literature envelope. 
Before installing the kit be sure to follow the L.P. 
Installation Instructions carefully.
GROUNDING INSTRUCTIONS
For personal safety, the cooktop must be properly 
grounded. For maximum safety, the power cord must be 
plugged into an electrical outlet that is correctly polarized 
and properly grounded.
DO NOT operate the cooktop using a 2-prong adapter or 
an extension cord. If a 2-prong wall receptacle is the only 
available outlet, it is the personal responsibility of the 
consumer to have it replaced with a properly grounded 
3-prong wall receptacle installed by a qualifi ed electrician.
See the INSTALLATION INSTRUCTIONS packaged 
with this cooktop for complete installation and grounding 
instructions.
Do not, under any 
circumstances, 
cut, remove, 
or bypass the 
grounding prong.
Power supply cord with 
3-prong grounding plug
Grounding 
type wall 
receptacle
CAUTION
Any additions, changes or conversions required in order 
for this appliance to satisfactorily meet the application 
needs must be made by an authorized Service Center.
ASSEMBLY OF THE SURFACE BURNER 
CAPS AND BURNER GRATES
It is very important to make sure that all of the Surface 
Burner Caps and Surface Burner Grates are installed 
correctly and at the correct locations.
1  Remove all packing material from cooktop area.
2  Discard all packing material (if applicable). 
3  Unpack Burner Grates and position on the cooktop.
REMEMBER — DO NOT ALLOW SPILLS, FOOD, 
CLEANING AGENTS OR ANY OTHER MATERIAL 
TO ENTER THE GAS ORIFICE HOLDER OPENING. 
Always keep the Burner Caps and Burner Heads in place 
whenever the surface burners are in use.