Whirlpool WCG51US6D 数据表

■

Use 7.0 mm wrench to loosen and remove the orifice 
spud (A).

■

Set gas orifice spud aside.

■

Replace with correct LP gas orifice spud. See LP gas 
orifice spud charts.

■

Use 7.0 mm wrench to loosen and remove the inner 
orifice spud (A) and the outer orifice spud (B).

■

Set gas orifice spuds aside.

■

Replace with correct LP gas orifice spuds. See the LP gas 
orifice spud charts.

■

Remove the spring that is shown in the following 
illustration (C).

■

Use 7.0 mm wrench to loosen and remove the inner 
orifice spud (A) and the outer orifice spud (B). 

■

Set gas orifice spuds aside.

■

Replace with correct LP gas orifice spud. See the LP gas 
orifice spud charts.

■

Return the spring to its original location.

IMPORTANT: Place Natural gas orifice spuds in plastic parts 
bag for future use and keep with package containing 
literature.

10. Replace sheet of insulation. 

11. Replace burner bases and burner caps.

The igniter electrode is ceramic and could break during 
conversion. Be sure that the electrode comes through the hole 
in the burner smoothly while you are replacing the burner base.

12. Open shutoff valve in the gas supply line. The valve is open 

when the handle is parallel to the gas pipe.

13. Plug in cooktop or reconnect power.

REMEMBER: Once you have completed converting all of the 
cooktop burners, test the cooktop for leaks by brushing on 
an approved noncorrosive leak-detection solution. If bubbles 
appear, a leak is indicated. Correct any leaks found.

14. To adjust single and dual valves, see the “Flame Height 

Adjustment” section.

D

A

B

C

A

B

C

D

E

D

A

B

C

A

A

B

A

B

A

B

C

B

C

A