Whirlpool WCG51US0DS 数据表

Completely tighten screw “C” to set the minimum flame 
height.

Tighten screw “C” to reduce flame height. Loosen screw to 
increase flame height. See “Complete Burner Adjustment” 
section.

5. Replace the control knob.

6. Test the flame by turning the control from LO to HI, checking 

the flame at each setting.

1. Set the inner crown flame to LO.

2. Remove the control knob.

3. Remove the black rubber grommet.

4. Using needle-nose pliers, remove the gray shield inside the 

burner valve opening.

Completely tighten screw “A” to set the minimum flame 
height.

Tighten screw “A” to reduce flame height. Loosen screw to 
increase flame height. See “Complete Burner Adjustment” 
section.

6. Replace the control knob.

1. Set the outer crown flame to LO.

2. Remove the control knob.

Completely tighten screw “B” to set the minimum flame 
height.

Tighten screw “B” to reduce flame height. Loosen screw to 
increase flame height. See “Complete Burner Adjustment” 
section.

4. Replace the gray shield. Use a screwdriver to help push the 

shield into place.

5. Replace the black rubber grommet.

6. Replace the control knob.

7. Test the flame by turning the control from LO to HI, checking 

the flame at each setting.

1. Check burner flame(s) for a proper size and shape. The 

cooktop low burner flame should be a steady blue flame 
approximately 

¹⁄₄" (0.64 cm) high.

2. Completely fill out the conversion label and attach label to 

bottom of the cooktop next to the rating tag. Do not cover the 
rating tag with the conversion label.

IMPORTANT: Place gas orifice spuds in plastic parts bag for 
future use and keep with package containing literature.

Read “Sealed Surface Burners” section in the Use and Care 
Guide supplied with your cooktop.

³⁄₃₂

B

C

A

A

B

Me

d

A

B

C

B

A

A

B