Maytag MET8720D 使用和维护

■

affresh

® 

Cooktop Cleaner and Cooktop Cleaning Pads: 

Clean as soon as cooktop has cooled down. Rub product into 
surface with a Cooktop Cleaning Pad. Continue rubbing until 
white film disappears. Scratches and abrasions do not affect 
cooking performance, and after many cleanings they will 
become less noticeable.

To avoid damage to the cooktop controls, do not use steel wool, 
abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
When removing or replacing knobs, make sure knobs are in the Off 
position.
Do not remove seals under knobs, if present.
Cleaning Method:

■

Warm, soapy water: 
Pull knobs straight away from control panel to remove.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.
To avoid turning the controls on while cleaning, you may activate 
the Control Lock feature (on some models). See “Control Lockout” 
section.
Cleaning Method:

■

Glass cleaner and soft cloth or sponge: 
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):
See “Assistance or Service” section to order.

■

Glass cleaner and paper towels or nonabrasive plastic 
scrubbing pad: 
Apply glass cleaner to soft cloth or sponge, not directly on 
panel. 

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):
See “Assistance or Service” section to order.

Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.
Cleaning Method:

■

Self-Cleaning cycle: 
See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle: 
See “Self-Cleaning Cycle” first. Remove racks, or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad.

The ovens light is a standard 40-watt appliance bulb. 
Before replacing, make sure the oven and cooktop are cool and the 
control knobs are off.

1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.

Use two hands to remove oven door(s).

■

Prior to removing the oven door, prepare a surface where you 
will place it. This surface should be flat and covered with a soft 
blanket.

To avoid oven door glass breakage:

■

Do not close the oven door if the racks are not fully inserted 
into the oven cavity or when bakeware extends past the front 
edge of an oven rack.

■

Do not set objects on the glass surface of the oven door.

■

Do not hit glass surfaces with bakeware or other objects.

■

Do not wipe down glass surfaces until the oven has completely 
cooled.

For normal range use, it is not suggested to remove the oven door. 
However, if removal is necessary, make sure the oven is off and 
cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.
2. Locate the oven door hinge locks in both corners of the oven 

door. Rotate the hinge locks forward and down to the unlocked 
position.

3. Partially close the oven door to engage the door latch locks. 

The door will stop at this point.

4. Using two hands, lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

5. Set the oven door(s) aside on the prepared covered work 

surface, with the oven door resting on its handle.