Whirlpool WMH32519CB 业主指南

■

Browning dish (Follow manufacturer recommendations.)

■

Ceramic glass, glass

■

China, earthenware (Follow manufacturer recommendations.)

■

Melamine (Follow manufacturer recommendations.)

■

Paper towels, paper plates, napkins (Use non-recycled paper.)

■

Plastic wraps, bags, covers, dinnerware, containers (Follow 
manufacturer recommendations.)

■

Pottery and clay (Follow manufacturer recommendations.)

■

Silicone bakeware (Follow manufacturer recommendations.)

■

Wax paper

■

Metal cookware and bakeware

■

Straw or wicker

■

Gold, silver or pewter

■

Non-approved meat thermometers, skewers

■

Twist ties

■

Foil liners, such as sandwich wrappers

■

Staples

■

Objects with gold or silver trim or with metallic glaze

To Test Cookware/Dinnerware: Place dish in microwave oven with 1 cup (250 mL) of water beside it. Program 1 minute of cook time at 
100%. If dish becomes hot and the water stays cool, do not use the dish in the microwave oven.

For list of preset programs, see the Cooking Guide label on the front facing of the microwave oven opening, behind the door.

Touch COOK TIME, touch number pads to enter time, touch 
COOK POWER (if not 100%), touch number pads to enter power 
level (10-90), then touch the Start control.

If programming additional stages (up to three), touch OPTIONS/
CLOCK to enter programming for the next stage, then enter the 
cook time and cook power of each, then touch the Start control.

A sensor in the microwave oven detects moisture released from 
food as it heats, and adjusts the cooking time accordingly.

Make sure microwave oven has been plugged in for at least 
1 minute. Use microwave-safe dish with loose-fitting lid, or cover 
microwave-safe dish with plastic wrap and vent. For optimal 
performance, wait at least 30 minutes after convection cooking or 
grilling (on some models) before sensor cooking.

At the end of any cycle, “PRESS 0 TO ADD MORE TIME” scrolls in 
the display. Enter the additional time, if desired, and start the 
microwave oven. The cook power for all non-sensor cycles will be 
the same as in the finished cycle, but may be changed. If Add More 
Time is used after a sensor cycle, the cook power will be 100%, 
but may be changed.

Adjust doneness for automatic cooking functions by touching 
COOK TIME repeatedly to scroll through “NORMAL,” “MORE 
DONE” or “LESS DONE” within the first 20 seconds of starting the 
cook cycle. Doneness cannot be adjusted for Defrost functions.

Hot cooked food can be kept warm in the microwave oven. The 
Warm Hold function uses 10% cook power. Warm Hold can be 
used by itself or can be programmed to follow a cooking cycle. 
Opening the door during Warm Hold will cancel the function.