Philips RFX9200 Network Extender RFX9200/37 产品宣传页

Issue date 2013-01-31

Version: 3.0.13

12 NC: 8670 000 33067
UPC: 6 09585 14098 1

© 2013 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice. 
Trademarks are the property of Koninklijke Philips 
Electronics N.V. or their respective owners.

Specifications

RFX9200/37

Network Extender

  

Highlights

 

Addressable IR ports enable control of the same 

type of devices in a rack independently (by the same 

extender). Typically this is the case with multiple set-

top boxes to distribute content throughout the 

house. Every device is asigned its own dedicated IR 

port. As a result the device will only receive the IR 

codes that are intended for this device and not for 

any other. Without addressable IR codes, every 

device will always receive all sent-out IR codes.

The smart 2-way Pronto protocol regulates the 

commands that are sent from the Pronto control 

panel to the extenders. Each extender will 

acknowledge the execution and the user will be 

informed in case a command cannot be executed.

The powerful IR-circuit is capable of transmitting 

virtually any IR code. Where many remote control 

systems are limited to 125 kHz, the Pronto 

extenders can send IR-frequencies to up to 1 MHz.

• IR emitter connectors: 4

• AC/DC  Adaptor

• Printed User Guide

• Single IR emitter wires: 4

• Warranty Card

• Addressable IR output: Adjustable IR output level

• Carrier frequency range: 30k - 100kHz + 455kHz

• Adresses (ID's): 16

• Frequency (GHz): 2.4

•