Amana PTH123G25AXXX 规格说明表单

SS-DPTAC

www.amana-ptac.com

5

(Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration)

Watts ⁶

MOD ⁴ 

230/208V

2.5

1

8,500

6,800

- -

2,570 / 2,115

11.2 / 10.1

14.1

15

6-15 P

230/208V

3.5

1

12,000

9,900

- -

3,570 / 2,935

15.5 / 14.1

19.5

20

6-20 P

230/208V

5

1

17,100

14,000

- -

5,070 / 4,160

22.1 / 20.0

27.6

30

6-30 P

265V

2.5

1

- -

- -

8,500

2,570

9.7

12.2

15

7-20 P

265V

3.7

1

- -

- -

12,600

3,770

14.2

17.9

20

7-20 P

265V

5

1

- -

- -

17,100

5,070

19.2

23.9

25

7-30 P

Notes
¹    All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).
²     Minimum branch circuit ampacity ratings conform to the National Electric Code; however, local codes should apply.
³    Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.      Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.
⁴    Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay 

fuses (included and factory-installed on all Amana® brand 265-volt chassis).

⁵    Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat at approximately 24°F 

outdoor ambient.

⁶    Total watts for 15,000 BTU/h models; subtract 20 watts for PT07/09/12
⁷    Specify two-digit heater kW size to complete model number.
⁸    R-410A refrigerant used in all systems.
⁹   All units meet or exceed ASHRAE 90.1 standards.
¹⁰   All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

Voltage ¹, ³

230 / 208

230 / 208

230 / 208

230 / 208

265

265

265

265

BTU/h ⁵

6,800 / 6,800

8,300 / 8,100 11,500 / 11,300 13,800 / 13,600

6,800

8,300

11,400

13,700

Amps ¹⁰

3.9

4.2 / 4.2

5.8 / 5.8

7.0 / 7.0

3.1

3.7

5.0

6.1

Watts ¹⁰

585 / 570

715 / 700

1085 /1035

1350 / 1330

570

715

1080

1340

COP ⁵

3.4 / 3.5

3.4 / 3.4

3.1 / 3.2

3.0 / 3.0

3.5

3.4

3.1

3.0

CFM (Dry)

370

360

370

410

370

360

370

410

COP = Coefficiency of Performance; per AHRI Test Procedures, units are rated for capacities and efficiencies.

Notes
¹    All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).
²     Minimum branch circuit ampacity ratings conform to the National Electric Code; however, local codes should apply.
³    Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.       

Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.

⁴    Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay 

fuses (included and factory-installed on all Amana® brand 265-volt chassis).

⁵    Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat at approximately 24°F 

outdoor ambient.

⁶    Specify two-digit heater kW size to complete model number.
⁷    R-410A refrigerant used in all systems.
⁸    All units meet or exceed ASHRAE 90.1 standards.
⁹    All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.
¹⁰   Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.