Frigidaire FGMC2765PF 安装指导

下载
页码 18
5
MICROWAVE/ WALL OVEN COMBINATION
INSTALLATION INSTRUCTIONS
Figure 6
Figure 7
Bottom Trim
Screws 
supplied
6.  Install the Anti-tip Mounting Screws
 The wall oven can tip when the door is 
open. The anti-tip mounting screws supplied with the 
wall oven must be installed to prevent tipping of the 
wall oven and injury to persons.
A. The mounting holes in the side trims may be 
used as a template to locate the appliance mounting 
screw holes (see fi gure 6).
B. Use the two screws supplied to fi x the appliance 
to the cabinet.
Tip Over Hazard
• A child or adult can tip the oven 
and be killed.
• Install the anti-tip device to oven 
and/or structure per installation 
instructions.
• Ensure the anti-tip device is re-engaged when the 
oven is moved.
• Do not operate the oven without the anti-tip device 
in place and engaged.
• Failure to follow these instructions can result in 
death or serious burns to children and adults.
Refer to the installation 
instructions supplied with your 
appliance for proper installa-
tion.
Check for proper installation 
with a visual check that the 
anti-tip screws are present. 
Test the installation with light 
downward pressure on the 
open oven door. The oven 
should not tip forward.
Anti-tip mounting holes
7.  Install the Bottom Trim
IMPORTANT: Bottom trim must be installed for the 
oven to function properly. DO NOT operate the oven 
without the bottom oven trim installed.
Place the top of the bottom trim over the side trim 
tabs on each side of the oven below the oven door 
and fi x it using the 2 screws supplied in the mounting 
holes located on each side trim below the oven 
frame (see Figure 7).