GE JK3500DFBB 手册

14

49-80656-2

Do not lift the door by the handle. 

1.  Fully open the door.

2.  Pull the hinge locks down toward the door frame, to 

the unlocked position. A tool, such as a small flat-
blade screwdriver, may be required.

3.  Firmly grasp both sides of the door at the top.

4.  Close door to the door removal position. The door 

should be open approximately 3" with no obstruction 
above the door.

5.  Lift door up and out until both hinge arms are clear of 

the slots.

1.  Firmly grasp both sides of the door at the top.

2.  Starting on the left side, with the door at the same 

angle as the removal position, seat the indentation of 
the hinge arm into the bottom edge of the hinge slot. 
The notch in the hinge arm must be fully seated into 
the bottom of the slot. Repeat for right side.

3.  Fully open the door. If the door will not fully open, the 

indentation is not seated correctly in the bottom edge 
of the slot.

4.  Push the hinge locks up against the front frame of the 

oven cavity, to the locked position.

5.  Close the oven door.

The door is very heavy. Be careful when removing and lifting the door.

Hinge lock

Slot

Pull hinge locks down to unlock

Push hinge locks up to lock

Hinge 

lock

Hinge 

arm

Indentation

Bottom 

edge of 

slot

Hinge arm