Reliable E40 业主指南

下载
页码 34
22
Run the cloth evenly on the surface without 
pushing down on it. Repeat on heavily soiled 
areas.  In case of ceramic floor, use the 
brush without cloth to remove persistent 
dirt. Always wipe the surface with a clean dry 
cloth to remove the soiled steam residue. 
Wax removal from ceramic floors:
Use the brush without cloth; then wipe 
away the soiled steam residue with a clean 
dry cloth.
Other large surfaces: 
Use the triangular brush 26 or the 
rectangular brush 21 with or without 
extension wand. 
 
This set is recommended for:
t
8BMMTUJMFT
t
#MJOET TIVUUFST SPMMJOHTIVUUFST
To clean these surfaces, please refer to the 
instructions above.  
CAUTION
 
ATTENTION
 
IMPORTANT
When cleaning vertical surfaces, always 
remember that steam dissolves the dirt which 
runs downward. Therefore, it is necessary to 
be prepared to collect the dissolved dirt using 
a clean dry cloth.
CAUTION
 
ATTENTION
 
IMPORTANT
With extended use or excessive pressure, the 
brush bristles could pierce the cloth cover 
and scratch the treated surface. Do not exert 
undue pressure and regularly check that the 
bristles are not poking through the cloth. 
Correct cleaning depends on the steam 
power rather than on the pressure exerted on 
the brush.
CAUTION
 
ATTENTION
 
IMPORTANT
When cleaning delicate surfaces or hand-
painted tiles, always mount the cloth on the 
brush. Always carry out a preliminary test by 
spraying the steam on a small less visible 
area of the surface and check the results 
once dry. 
 
 
CLEANING FURNITURE
Recommended accessories:
26  Triangular brush
Always mount the cloth supplied on the 
triangular brush 26 and set the variable 
steam control to an intermediate position 
NJOJNVNGPSPSEJOBSZDMFBOJOHPSEFMJDBUF
surfaces like antique, lacquered or 
upholstered pieces of furniture; maximum: to 
remove grease stains from kitchen elements 
PSSFTJTUBOUQMBTUJDMBNJOBUFGVSOJUVSF 
Run the cloth evenly on the whole surface 
without pushing down on it. Repeat on 
heavily soiled areas. If necessary, increase 
the steam flow. Always, wipe the treated 
surface with a clean dry cloth after cleaning.
64&