Whirlpool WOS97ES0ES 安装指导

1.   Flex the upper vent piece (C) away from the lower vent piece 

(D) to slide the warming drawer deflector (B) between them. 

Some force may be required to flex the upper vent trim (C) 

away from the lower vent trim (D). Some force may also be 

required to flex the warming drawer deflector (B) and slide 

it into position. Make sure screw holes are properly aligned 

between the two pieces. See the following illustration.

2.   Install the warming drawer deflector (B) to the lower vent 

piece (D) using two #8-18 x 1/4" screws on each side.
NOTE: On 27" (68.6 cm) models, only one #8-18 x 1/4" screw 

is used on each side.

A

C

D

B

E

1.   Check that all parts are now installed. If there is an extra 

part, go back through the steps to see which step was 

skipped.

2.  Check that you have all of your tools.
3.  Dispose of/recycle all packaging materials.
4.  For oven use and cleaning, read the Use and Care Guide.

1.   Turn on power.
2.   At first use, set up the clock and any other preferences 

if available. For more information, read the Use and Care 

Guide.

3.  Press BROIL on single oven models.

4.  Set the temperature.
5.  Press START.

■

 Household fuse is intact and tight; or circuit breaker has 

not tripped.

■

 Electrical supply is connected.

■

 See “Troubleshooting” section in the Use and Care 

Guide.

6.  When oven has been on for 5 minutes, feel for heat.

 If you do not feel heat or if an error message appears in the 

display, turn off the oven and contact a qualified technician.

7.  Press UPPER CANCEL/LOWER CANCEL on double ovens,  

  or press CANCEL on single ovens.

Please reference the “Warranty” section of the Use and Care 

Guide.

NOTE: Press UPPER BROIL or LOWER BROIL on 

double oven models.

3.   Align vent tab (B) with oven frame (A) as shown in the  

following illustration.

 

4.  Using one #8-18 x ³⁄

8

" screw (E) on each side of the vent tab  

  (B), fasten the vent securely to the oven.

D

B

A

C

B

D

C