Whirlpool WOS97ES0ES 安装指导

IMPORTANT: Observe all governing codes and ordinances. 

■

 

Cabinet opening dimensions that are shown must be used. 

Given dimensions provide minimum clearance with oven.

■

 

Recessed installation area must provide complete 

enclosure around the recessed portion of the oven.

■

 

Grounded electrical supply is required. See “Electrical 

Requirements” section.

■

 

Electrical supply junction box should be located 3"  

(7.6 cm) maximum below the support surface when the 

oven is installed in a wall cabinet. A 1" (2.5 cm) minimum 

diameter hole should have been drilled in the right rear or 

left rear corner of the support surface to pass the appliance 

cable through to the junction box.
NOTE: For undercounter installation, it is recommended 

that the junction box be located in the adjacent right or left 

cabinet. If you are installing the junction box on rear wall 

behind oven, it is recommended that the junction box be 

recessed and located in the upper center of the cabinet. 

■

 

Oven support surface must be solid, level, and flush with 

bottom of cabinet cutout.

■

Floor must be able to support a single oven weight of           

 

154 lbs (70 kg).

■

Floor must be able to support a double oven weight of         

 

288 lbs (131 kg).

 IMPORTANT: To avoid damage to your cabinets, check 

with your builder or cabinet supplier to make sure that 

the materials used will not discolor, delaminate, or sustain 

other damage. This oven has been designed in accordance 

with the requirements of UL and CSA International and 

complies with the maximum allowable wood cabinet 

temperatures of 194°F (90°C).

Undercounter Installation (With Cooktop Installed Above):
Ovens approved for this type of installation have an approval 

label located on the top of the oven. Refer to Cutout Dimensions 

For Ovens Installed Under Cooktop (separate sheet).

³⁄

4

⁄

16

³⁄

4

1/4