Viking TVDR3604BSS 业主指南

22

 DO  NOT  touch a hot oven light bulb with a damp 
cloth as the bulb could break. Should the bulb break, 
disconnect electric power to the appliance at the 
main fuse or circuit breaker before removing bulb to 

avoid electrical shock.

The lights inside the oven are located in the top near the door opening.
To replace the light bulb:
1.  Locate light bulb cover in top of oven cavity.
2. Unscrew glass light cover.
3.  Use oven miitt during bulb removal to protect your hand in case the bulb breaks.
4. Replace the bulb with a 230 volt, 25-watt appliance bulb.
5. Replace the light cover
6. Reconnect power at the main fuse or circuit breaker.

Range will not function.

Range is not connected to electrical power: Have electrician 

check power circuit breaker, wiring, and fuses.

 Broil does not work.

  Temperature control knob is rotated too far past 

broil position.

 Oven light will not work.

 Light bulb is burned out. 

Range is not connected to power.

 Igniters will not work.

 Circuit is tripped. 

Fuse is blown.

Range is not connected to power.

 Igniters sparking but no fl ame ignition.

 Gas supply valve is in “OFF” position.

Gas supply is interrupted.

 Igniters sparking continuously after 

fl ame ignition.

 Power supply is not grounded.

Power supply polarity is reversed.

Igniters are wet or dirty.

 Burner ignites but fl ame is large, distorted, or 

yellow.

 Burner ports are clogged.

Unit is being operated on wrong type of gas.

Air shutters not properly adjusted.

 Strong odor and/or smoke is noticed fi rst few 

times oven is used.

 This is normal burn off  of insulation and protective oils in oven. 

This will go away after using oven a few times.

 Oven indicator light on; oven will not heat.

 Oven is operating properly. Unit will resume heating 

function once it has cooled.