Capital COB484G2SSL 使用和维护
19
SPECIAL FUNCTIONS
SELF CLEAN
WARNING:
Remove all racks, cooking vessels, utensils, meat probe and all other items from the oven prior to
cleaning.
cleaning.
IMPORTANT:
Clean excess spillage, grease and other cooking byproducts from the oven prior to Self Cleaning.
WARNING:
Do not line the oven with aluminum foil or other materials. They may melt, burn or cause
permanent damage to the oven.
permanent damage to the oven.
WARNING:
Do not touch the outer surfaces of the oven during the Self-Clean cycle as the oven may be hot.
WARNING:
The oven door is automatically locked during the Self Clean cycle. Do not try and open or force
the door open. Damage to the oven may occur.
the door open. Damage to the oven may occur.
NOTE:
Some smoke and odors are normally present during the Self Clean cycle as the food residue
burns off.
burns off.
NOTE:
Some noise may occur during the cleaning cycle and when the oven is cooling after the cycle
ends. Metallic clicking and popping sounds are normal and are caused by the heat expanding or
contracting the metal of the oven.
ends. Metallic clicking and popping sounds are normal and are caused by the heat expanding or
contracting the metal of the oven.
Self Clean uses high temperature to burn off most food residue in the oven. After self clean is complete the oven can be
wiped down with moist sponge after cooling to remove the ashen residue.
wiped down with moist sponge after cooling to remove the ashen residue.
The Self Clean function runs for 3 hours and takes approximately an additional 1 to 2 hours to cool down.
The oven door automatically locks when the Self Clean function is started and will unlock automatically when the oven
cools to less than 500° F and the cooling fan is On during the entire Self Clean cycle and will continue to run until the oven
door lock is cool.
cools to less than 500° F and the cooling fan is On during the entire Self Clean cycle and will continue to run until the oven
door lock is cool.
To use SELF CLEAN :
o
Follow all listed WARNINGS
o
For a 48” or 60” range select the oven to clean or for a 30” or 36” range, press the MODE dial and rotate to
select SELF CLEAN.
select SELF CLEAN.
o
Press START. The door latch will lock the door and a LOCK icon will be displayed on the control. The PRE icon
and ON icon will be displayed on the control to indicate the oven is heating. PRE will be displayed for
approximately 45 minutes. This rapidly heats up the oven to SELF CLEAN temperatures.
and ON icon will be displayed on the control to indicate the oven is heating. PRE will be displayed for
approximately 45 minutes. This rapidly heats up the oven to SELF CLEAN temperatures.
o
The ON icon will display when the heaters are on to maintain Self Clean temperatures.
o
The control will display a countdown of 3 hours in the clock section.
o
When the Self Clean cycle is complete the Time of Day will be displayed and the LOCK icon will remain on until
the oven is cool enough for the door to unlock (approximately 525° F).
the oven is cool enough for the door to unlock (approximately 525° F).
o
When the oven is cool the interior may be wiped down with a damp cloth or sponge and mild detergent to
remove ash residue.
remove ash residue.
o
If solids remain stuck to the oven bottom glass, they may be removed by lightly scraping with a flat razor blade
(Use Caution when using a razor to prevent injury).
(Use Caution when using a razor to prevent injury).