Monogram ZIFS360NXRH 手册

18

Anti-Tip Bracket Installation

• Open the access door.

• Using a 1/4" hex driver, remove the 2 screws 

at the bottom of the grille.

• Pull the bottom of the grille forward, down 

and out to remove.

• Open the access door.

• Using a 1/4" hex driver, remove the 2 screws 

at the bottom of the grille on the right.

• Pull the bottom of the grille forward, down 

and out to remove.

• Using a 1/4" hex driver, remove the screw 

on the left side of the grille.

• The grille is aluminum and will bend easily.

Gently pull forward on the left side of the grille
to open for access. This grille will not be
completely removed.

Locate the power cord inside the left cavity. 
If it has not been adjusted so the plug is easily
accessible, do so now.

• Move refrigerator toward its final installed

location. Align the tabs on the wall bracket 
with the openings in the back of the unit. 

• The unit has “L” bolts in the upper left and right 

corners inside of the access compartment.
These bolts will interlock with the wall bracket
and secure the unit using the washers and hair
pin cotters in the hardware kit once the unit has
been leveled and is in the final position. 

“L” Bolt

Left Grille Open

Power Cord Location

“L” Bolt

Left Grille Open

Power Cord Location

Screws

Screws