Maytag MSB27C2XAW 数据表

The water filter status light will help you know when to change 
your water filter. 

■

When the dispenser control panel’s water filter status display 
changes to “ORDER,” this tells you that it is almost time to 
change the water filter cartridge. 

■

Replace the water filter cartridge when the water filter status 
display changes to “REPLACE.” 

If water flow to your water dispenser or ice maker decreases 
noticeably, change the filter sooner. The filter should be replaced 
at least every 6 months, depending on your water quality and 
usage.

■

After changing the water filter, reset the status light by 
pressing and holding the FILTER button for 3 seconds. When 
the system is reset, the “ORDER” and “REPLACE” icons will 
disappear from the display screen.

1. Locate the water filter in the top-right corner of the 

refrigerator compartment.

2. Lift open the filter cover door. The filter will be released and 

then be ejected as the door is opened.

3. When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling 
may occur. Use a towel to wipe up any spills.

4. Take the new filter out of its packaging and remove the 

covers from the O-rings. Be sure the O-rings are still in place 
after the covers are removed.

5. With the arrow pointing up, align the new filter with the filter 

housing and slide it into place. The filter cover door will 
automatically begin to close as the new filter is inserted.

6. Close the filter cover door completely in order to snap the 

filter into place. You may need to press hard.

7. Flush the water system. See “Water and Ice Dispensers.”

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid 
buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any 
odors formed in one section will transfer to the other. You must 
thoroughly clean both sections to eliminate odors. To avoid odor 
transfer and drying out of food, wrap or cover foods tightly.

NOTE: Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners or 
gaskets. Do not use paper towels, scouring pads, or other harsh 
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

3. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. 

4. There is no need for routine condenser cleaning in normal 

home operating environments. If the environment is 
particularly greasy or dusty, or there is significant pet traffic in 
the home, the condenser should be cleaned every 2 to 
3 months to ensure maximum efficiency.

If you need to clean the condenser:

■

Remove the base grille. See the “Door Removal” 
instructions, either in the User Instructions or the separate 
instruction sheet provided with your refrigerator.

■

Use a vacuum cleaner with a soft brush to clean the grille, 
the open areas behind the grille and the front surface area 
of the condenser.

■

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

Do not use with water that is microbiologically unsafe or 
of unknown quality without adequate disinfection before 
or after the system. Systems certified for cyst reduction 
may be used on disinfected waters that may contain 
filterable cysts.