Amana ASD2575BRS 安装指导

When you are moving your refrigerator to a new home, follow 
these steps to prepare it for the move.
1. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

Disconnect the water line from the back of the refrigerator.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

2. Remove all food from the refrigerator and pack all frozen food 

in dry ice.

3. Empty the ice bin.
4. Depending on the model, turn the Refrigerator Control to OFF 

or turn cooling off. See “Using the Controls” in the User 
Instructions, User Guide, or Use & Care Guide.

5. Unplug refrigerator.
6. Clean, wipe, and dry thoroughly.
7. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

8. Depending on the model, raise the front of the refrigerator so it 

rolls more easily OR screw in the leveling legs so they don't 
scrape the floor. See “Adjust the Doors” or “Door Removal, 
Leveling and Alignment.”

9. Tape the doors closed and tape the power cord to the back of 

the refrigerator.

When you get to your new home, put everything back and refer to 
the Installation Instructions for preparation instructions. Also, if 
your refrigerator has an automatic ice maker, remember to 
reconnect the water supply to the refrigerator.

■

Not connected to an electrical supply - Plug the power cord into a grounded 3 prong outlet. 
Do not use an extension cord.

■

No power to the electrical outlet - Plug in a lamp to see if the outlet is working. 

■

Household fuse has blown or circuit breaker has tripped - Replace the fuse or reset the circuit 
breaker. If the problem continues, contact a licensed electrician.

■

Control or cooling is not turned on - Turn on the refrigerator control, or turn cooling on. 
See “Using the Controls” in the User Instructions or User Guide.

■

New installation - Following installation, allow 24 hours for the refrigerator and freezer to cool 
completely.

NOTE: Adjusting the temperature control(s) to the coldest setting will not cool either 
compartment (refrigerator or freezer) more quickly.

■

Your new refrigerator has an energy-efficient motor - The refrigerator may run longer than 
you’re used to, because the compressor and fans operate at lower speeds that are more 
energy-efficient. This is normal. 

NOTE: Your refrigerator may run even longer if the room is warm, a large load of food is added, 
the doors are opened often, or if a door has been left open.