GE PSB48YSHSS 规格说明表单
Specification Created 7/14
PSB48YPH
GE Profile
™
Series 48" Built-In Side-By-Side Refrigerator with Dispenser
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
.250 + .750 = 1.000 Maximum Total Panel Thickness
3/4" Custom Panel Dimensions
For a more custom appearance, 3/4" framed custom panels may be installed on
trimmed models. The custom panel must be cut to dimensions specified below.
The custom panel then slides into the trim. Please see installation instructions
for detailed information.
For a more custom appearance, 3/4" framed custom panels may be installed on
trimmed models. The custom panel must be cut to dimensions specified below.
The custom panel then slides into the trim. Please see installation instructions
for detailed information.
Custom Panel
Backer Panel
NOTE: Left-to-right offset is not always
equal to top-to-bottom offset.
equal to top-to-bottom offset.
1/4" Framed Panel Dimensions
If you choose to install framed panels, they must be cut to the dimensions
shown. The panels will slide into the frame on the door and grille
If you choose to install framed panels, they must be cut to the dimensions
shown. The panels will slide into the frame on the door and grille
.
ImPORTaNT NOTE:
Maximum weight for fresh food panel is 70
pounds, 45 pounds total for freezer panels
and 15 pounds for grille panel.
Maximum weight for fresh food panel is 70
pounds, 45 pounds total for freezer panels
and 15 pounds for grille panel.
1/4"
Panel
Door
5/16"
Trim
Reveal
D
G
E
A
B
Grille Panel
C
Dispenser
Cutout
Freezer
Panel
Fresh Food
Panel
F
ImPORTaNT NOTE:
Dispenser Trim
The refrigerator is supplied with factory installed
dispenser trim.
• If panel is less than 1/4" thick, a noticeable gap will
The refrigerator is supplied with factory installed
dispenser trim.
• If panel is less than 1/4" thick, a noticeable gap will
be created around the dispenser trim. Foam tape
may be applied on the door to improve the fit.
may be applied on the door to improve the fit.
• If panel is more than 1/4" thick, the panel will not fit
behind the trim.
3/4"
Custom
Panel
1/4"
Backer
Panel
Door
3/4"
Front panel dimensions (in inches)
42" models
48" models
48" models
A
B
C
D
E
F
G
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
39-7/8
45-7/8
45-7/8
40-1/8
46-1/8
46-1/8
10-3/4
10-3/4
10-3/4
11
11
11
67-3/4
67-3/4
67-3/4
68
68
68
22-1/2
26-1/2
26-1/2
22-1/2
26-1/2
26-1/2
17-3/4
17-3/4
17-3/4
18
18
18
35
35
35
35-1/4
35-1/4
35-1/4
16-1/2
18-1/2
18-1/2
16-1/2
18-1/2
18-1/2