GE PSB48YPHSV 安装指导
About the temperature controls.
GEAppliances.com
The temperature controls are preset in the factory at 37°F for
the refrigerator compartment and 0°F for the freezer compartment.
Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
The temperature controls can display both the SET temperature
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
NOTE: The refrigerator is shipped with protective film covering
NOTE: The refrigerator is shipped with protective film covering
the temperature controls. If this film was not removed during
installation, remove it now.
The Performance Air-Flow System is designed to
maximize temperature control in the refrigerator
and freezer compartments. This unique special feature
consists of the Air Tower along the back
wall of the refrigerator and the freezer. Placing food
in front of the louvers on these components will not
affect performance.
Performance Air Flow System
To change the temperature, press and release
the WARMER or COLDER button. SET will illuminate in the
display, as well as the set temperature. To change the
temperature, tap either the WARMER or COLDER button
(while SET is illuminated) until the desired temperature
is displayed. Refrigerator temperatures can be adjusted
between 34°F and 47°F and
the freezer temperatures can be adjusted
between –6°F and +8°F.
Once the desired temperature has been set,
the temperature display will clear after 10 seconds.
To display the temperature, the DISPLAY TEMP button
To display the temperature, the DISPLAY TEMP button
may be tapped.
Several adjustments may be required. Each time you
Several adjustments may be required. Each time you
adjust controls, allow 24 hours for the refrigerator to
reach the temperature you have set.
5