GE GDE03GGHWW 安装指导

5

Keep the outside clean. Wipe with a clean cloth 

lightly dampened with kitchen appliance wax or 

mild liquid dish detergent. Dry and polish with a 

clean, soft cloth. 
Do not wipe the refrigerator with a soiled dish 

cloth or wet towel. These may leave a residue 

that can erode the paint. Do not use scouring 

pads, powdered cleaners, bleach or cleaners 

containing bleach because these products can 

scratch and weaken the paint finish.

Protect the paint finish. The finish on the outside 

of the refrigerator is a high quality, baked-on 

paint finish. With proper care, it will stay new-

looking and rust-free for years. Apply a coat of 

kitchen/ appliance wax when the refrigerator is 

new, and then at least  

twice a year.

To help prevent odors, leave an open box of 

baking soda in the refrigerator.
Unplug the refrigerator before cleaning. If this 

is not practical, wring excess moisture out of 

sponge or cloth when cleaning around the 

control. 
Use warm water and baking soda solution –

about a tablespoon (15 ml) of baking soda to 

a quart (1 liter) of water. This both cleans and 

neutralizes odors. Rinse and wipe dry.

Other parts of the refrigerator–including door 

gaskets, fruit and vegetable drawers, and all 

plastic parts–can be cleaned the same way.
Do not wash any plastic refrigerator parts in the 

dishwasher.

Unplug the refrigerator before replacing a 

burned-out bulb. Setting the controls to OFF 

does not remove power to the light circuit. 
The light bulb is located behind the temperature 

control housing and is visible through the light 

shield.

Remove the light shield by snapping it from the 

bottom of the housing. Gently unscrew the light 

bulb. Replace with a bulb of the same or lower 

wattage.

Bulb

Light Shield