GE GCE06GGHBB 安装指导

5

.HHSWKHRXWVLGHFOHDQWipe with a clean cloth lightly dampened 

with kitchen appliance wax or mild liquid dish detergent. Dry and 

polish with a clean, soft cloth. 
Do not wipe the refrigerator with a soiled dish cloth or wet towel. These 

may leave a residue that can erode the paint. Do not use scouring 

pads, powdered cleaners, bleach or cleaners containing bleach 

because these products can scratch and weaken the paint finish.
3URWHFWWKHSDLQWILQLVKThe finish on the outside of the refrigerator is 

a high quality, baked-on paint finish. With proper care, it will stay new-

looking and rust-free for years. Apply a coat of kitchen/ appliance wax 

when the refrigerator is new, and then at least twice a year.

7RKHOSSUHYHQWRGRUV leave an open box of baking soda in the 

refrigerator.
8QSOXJWKHUHIULJHUDWRUEHIRUHFOHDQLQJIf this is not practical, wring 

excess moisture out of sponge or cloth when cleaning around the 

control. 
Use warm water and baking soda solution –about a tablespoon (15 

ml) of baking soda to a quart (1 liter) of water. This both cleans and 

neutralizes odors. Rinse and wipe dry.
Other parts of the refrigerator–including door gaskets, fruit and 

vegetable drawers, and all plastic parts–can be cleaned the same way.
Do not wash any plastic refrigerator parts in the dishwasher.

Unplug the refrigerator before replacing a burned-out bulb. Setting 

the controls to 2)) does not remove power to the light circuit. 
The light bulb is located behind the temperature control housing and 

is visible through the slots in the housing.

Using a Philips screwdriver, unscrew the lens and pull horizontally until 

the lens is removed. Gently unscrew the light bulb and replace with a 

bulb of 15 watts or less.

4

5

 6