GE GNS23GGH 安装指导

5

TurboCool rapidly cools the refrigerator 

compartment in order to more quickly 

cool foods. Use TurboCool when adding 

a large amount of food to the refrigerator 

compartment, putting away foods after they 

have been sitting out at room temperature or 

when putting away warm leftovers. It can also 

be used if the refrigerator has been without 

power for an extended period.
Once activated, the compressor will turn 

on immediately and the fans will cycle on 

and off at high speed as needed for eight 

hours. The compressor will continue to run 

until the refrigerator compartment cools to 

approximately 34°F (1°C), then it will cycle on 

and off to maintain this setting. After 8 hours, or 

if TurboCool is pressed again, the refrigerator 

compartment will return to the original setting.

How to Use
Press TurboCool. The refrigerator temperature 

display will show

.

After TurboCool is complete, the refrigerator 

compartment will return to the original setting.
NOTES:    The refrigerator temperature cannot 

be changed during TurboCool.

 

 The freezer temperature is not 

affected during TurboCool.

 

 When opening the refrigerator door 

during TurboCool, the fans will 

continue to run if they have cycled on.

The door alarm will sound if any door is open 

for more than 2 minutes. The beeping stops 

when you close  the door.

(on some models)

(on some models)

(on some models)

(on some models)

This product is equipped with an Energy Saver 

feature. The refrigerator is shipped with the 

Energy Saver feature enabled.
Over time, moisture can form on the front 

surface of the refrigerator cabinet and cause 

rust. If moisture does appear on the front 

surface of the refrigerator cabinet, turn off the 

Energy Saver feature by pressing and releasing 

the ENERGY SAVER pad on the control panel.

(on some models)

(on some models)