Monogram ZIC30GNHII 设计指南

• Cut bands and tape on the top and bottom 

of packaging with a utility knife.

• Unfold the cardboard seams and remove the top 

of the packaging.

• Slide the remainder of the box off of the appliance.

You can use a box cutter to cut the remaining
cardboard being VERY CAREFUL not to scratch 
the appliance.

• Remove the Styrofoam supports from around the unit.
• DO NOT remove door band or lower EPS banded

• Cut EPS skid at the sides near the front from the back

of the unit.

• Push unit forward & remove rear portion of the EPS

skid.

• Carefully lower rear onto the floor.
• Lean unit back slightly & remove front portion of the

EPS skid.

• Discard all unused packaging materials appropriately.
• The unit can now be moved using an appliance hand

truck or rolled on a properly protected floor by 2
people.

• Leave any protective film on the refrigerator until

installation is complete.